Concrete tools equipment rent




















Atlas Copco. Belshe Trailers. Blount International. Bosch Professional Tools. Elliott Equipment. Epiroc Hydraulic Attachments. Husqvarna Construction. Interstate Trailers. Generac Mobile Products. MBW Inc. New Holland Construction. Paladin Attachments. Falling off these machines can result in serious injury or death.

Never lift the hydraulics or drive a machine with another person riding along the outside of the machine. Buckets require extra care — a well maintained bucket can cut down on costs by digging and breaking out more efficiently, which reduces fuel consumption and increases the rate of job completion.

Prior to use, carefully check the following parts of your bucket:. One of the simplest—yet often overlooked—maintenance practices is the daily walkaround checklist. Be sure to check the engine oil, hydraulic fluid and coolant and top off when necessary.

Remember, it never hurts to ask your dealer or your tech. After a week or so, it is important to check the fuel filter and drain any water or debris that may have built up, or replace it if necessary.

Next, check all pivot points on the machine and grease where needed. Something that is often completely overlooked is the bucket or attachment. Be sure to check all the pivot points on the attachment as well, and grease where needed. Also, take a look at the teeth on the bucket. It is important to keep the radiator, oil cooler and other heat exchangers clean during operation.

Check for any accumulated debris, and wipe down when necessary. Remember, slow oil or coolant leaks tend to collect dust and other particulate matter—keep an eye out for potential problem areas during your daily checks. Many modern excavators offer special features that allow for easier maintenance.

Easy access is crucial when it comes to quick maintenance checks—all of our excavators feature a well-designed engine compartment and access panels. You should be able to access and locate components easily and safely. Another great feature on our newer excavators is a multi-function monitor in the cab. This electronic panel offers important performance readouts, and will let an operator know when fluid levels are low, or when maintenance is required.

You probably hear this a lot, but it is really important to use OEM filters and manufacturer-recommended fluids and fuel. The machines where developed and tested using these fluids and filters, and any difference in specs can affect the performance of the machine. Your technician will be sure to check the belt tension and alignment, keep up with the proper oil and fluid changes, and keep the cooling system running properly. Follow these maintenance tips to ensure optimal performance and reduce risks, labor costs, and downtime.

Usually hoses fail due to misapplication, deterioration or improper maintenance. If the hose fails, be extremely careful:. Please contact your local service manager with any questions on hydraulic hoses or to schedule an inspection. When using heavy machinery, certain practices can help reduce overall fuel consumption and costs. The following tips may help you save hundreds of dollars each year.

Inspect your air filters every 50 hours to ensure maximum operating performance. If the pleats of your filter are clogged with dirt, it is time to change the filter. We do not recommend cleaning the air filter, which can damage it. Changing your air filters regularly is the most simple and cost effective way to decrease fuel costs. When an air filter becomes clogged with dirt, the engine cannot get the air it needs and does not operate efficiently. Some machines have air flow indicators that tell you when it is time to change the filter.

If you wait until you see a warning, however, you have probably been wasting fuel. Lubricate your machine according to manufacturers recommendations. By keeping your machine properly lubricated, fuel efficiency is increased simply because the power needed to perform operations is reduced. The more mobility the components have, the less work the hydraulic system must perform.

Check tire air pressure before and after each use. If the tire pressure is low, fill the tires as soon as possible. Low air pressure can reduce the efficiency of your machine and lower fuel efficiency. Checking tire air pressure is easy and costs nothing. When you see signs of a mechanical problem, such as excessive black smoke, bring your machine in for repair before the problem gets worse. Mechanical problems, such as a bad fuel injector, can significantly reduce fue efficiency.

If your fuel injector is overfueling a cylinder, your machine is wasting fuel. Begin by running at a low rpm during operation, then slowly raise the rpm until the engine does not strain. This level will be the most efficient and effective rpm for the job. When a job does not require maximum power, running the engine at a lower rpm can significantly reduce fuel consumption. Most require service at least every hours.

Fuel efficiency is affected by many different components. The best way to ensure that your machine is working efficiently is to service it regularly. The following best practices will help you and your team operating in the winter. Cover the radiator intake to help the machine warm up faster. Thermal insulated coveralls are essential for anyone who is working outdoors in the winter. They are designed to maximize body heat containment while allowing a wide range of motion.

Worn under a hard hat, these liners keep your head and neck warm. Fleece lined fabric is the most popular choice because of its comfort and insulation levels. Keep spares on hand and remember to wash them regularly for the best results.

Maintain a stable center of gravity at all times. Glove selection is crucial to balancing warmth with dexterity. Make sure the fabric and textures are suited to your job and consider gloves that work with a liner.

They may be a little oversized, but they allow increased protection. Standing or walking on cold surfaces for long periods of time can quickly decrease your core body temperature. Double layer socks and boots designed for cold weather can make a big difference. These materials act as installation to help decrease the amount of body heat lost to the cold ground.

There are many types and sizes of heaters that help keep workers warm. Rent or purchase heaters for outdoor projects to increase worker productivity. Skin damaged by frostbite can suffer from long-term numbness.

In some cases, the tissue dies requiring removal of the body part. Personal injury can result from hot, pressurized coolant. Always shut off the engine and allow the radiator to cool before examining the system or beginning any work.

These failures either are related to using an improper coolant or to topping off the system with the wrong product. Check your radiator screen daily during warm weather for dirt, grass or other debris. A clear screen will help your machine stay cool and assure maximized performance.

Use compressed air to blow debris from the cores. If material remains, you can use high pressure water or steam to remove dust and debris, but compressed air is preferred. When the radiator is cool, slowly remove the radiator cap to reduce system pressure. Inspect the cap for damage or deposits of material.

If any cracks or damage are visible, install a new cap. Otherwise, clean and close the cap firmly. This stress leads to faster overheating and requires the operator to keep a close watch of the machine, especially in hot weather. Properly sanitizing heavy equipment is essential for maintaining the health, safety, and productivity of your team. Truck and machine cabs can be ideal environments for harboring and transmitting viruses and other illnesses.

Despite the fact that operators are typically alone in the cab, all it takes is one mechanic, supervisor, or second shift operator to hop in there, touch a surface, and potentially be infected or leave traces of a virus. Since the COVID pandemic, many companies have a heightened sense of awareness when it comes to maintaining cleanliness. Follow these heavy equipment sanitation tips to protect your team from coronaviruses, the flu, and any other pathogens that may strike.

Before you start actually sanitizing your construction machines, you have to find a disinfectant that is effective at eliminating the majority of viruses without damaging your equipment interior. To avoid harming or discoloring vinyl, plastics, leather, or other surface materials, we recommend using cleaners designed for automotive interiors, not general household.

Isopropyl based cleaning products can be used to sanitize the majority of hard and interior surfaces. Follow the instructions on the product for concentration, application method, and contact time. If you are trying to deactivate or kill a specific virus, check the EPA-approved disinfectant list for detailed descriptions of which types of cleaners to use for certain pathogens. You should consult your owner's manual for directions on how to clean monitors, touch screens and other sensitive surfaces without damaging them.

Once you have the proper cleaning solution, it's time to move into the cab. The person handling the sanitation should always wear latex or synthetic rubber gloves and a mask or face covering. Wearing personal protective equipment will ensure the team member is shielded from the cleaning chemicals, as well as prevent them from leaving traces of a virus on the surfaces they just wiped down. The most important parts of the cab to sanitize are the ones that we touch a lot. Those areas should be cleaned before each new person enters the machine and typically include all handles, joysticks, steering wheels, knobs, buttons, seat belts, seat belt latches, windows, and even floor mats.

Spray surfaces with the cleaner and use a highly absorbent microfiber cloth to scrub and wipe dry. For sensitive electronic or display areas, use an EPA approved contactless product, which you can spray and let dry without needing to wipe off.

Just as important as sanitizing interior hard surfaces are exterior surfaces. Spray, scrub, and wipe all machine touchpoints, including the dipstick, gas cap, engine access points, handles, latches, and anywhere else likely to have contact.

Although it typically does not have to be sanitized as often as hard surfaces, it's a good idea to clean your upholstery at least every week, if not more frequent.

You will find a variety of upholstery products at any auto parts store. We offer a complete line of other rental solutions for the concrete and masonry industries. Choose from drills, mixers, trowels, saws and more, plus a variety of gas and electric tools that will help you get the job done right. From walk-behind concrete saws and scarifiers to mortar mixers and site dumpers, we have the concrete tool rentals you require in stock and ready to perform.

If you plan to use concrete, you will need a reliable way to mix it and transport it around the job site. Concrete that's mixed or set improperly can develop structural issues down the line, so it's important to choose the best machines available. At The Cat Rental Store, we offer every type of rental equipment you need to work with freshly mixed concrete, including:. The buckets, buggies, mixers and dumpers in our selection feature different capacities, so you can select the ideal size for your application.

Working with concrete after it has set requires a different set of tools. Whether you need to cut through concrete cleanly or remove it entirely, we have concrete rental equipment to help you work efficiently. In our selection, you will find:. If you're not sure which tool will work best for your application, our knowledgeable product experts can answer your questions and help you make an informed decision.

If you only need a piece of equipment for a short duration, such as to replace a machine out for repairs or to tackle a one-time application, renting makes an ideal choice. Our concrete equipment for rent helps everyone from commercial contractors to small construction companies find the tools and machines they need when they need it most.

You're able to increase flexibility and reduce risks and long-term expenses. Whether your team works with concrete every day or only occasionally, renting concrete equipment comes with significant advantages, both financial and practical.



0コメント

  • 1000 / 1000